Run down adapters (RDA) are designed to provide consistent and reliable torque readings when testing power driven torque control tools. RDA’s reduce the impact and irregular peaks that cause poor repeatability. Each RDA has an effective torque range and will provide repeatable torque data within that range if used correctly. The run down adapter is mounted in-line between the tool drive and transducer.
- Designed to provide consistent and reliable torque readings for use with power driven torque control tools.
- Adapter is mounted in-line between tool drive and transducer.
- Hardened thread components, increase accuracy and life.
- Square drives conform to ASME B107 standards for proper fit.
- Non-rotating body for improved safety.
- Compact size and lightweight.
- Operates in clockwise direction only. After each run down, the RDA should be completely backed-up
| Model | Capacity* | Square Drive (M/F) |
|---|---|---|
| RDA-10i | 10 Lb-in / 113 N-cm | 1/4″ |
| RDA-25i | 25 Lb-in / 282 N-cm | 1/4″ |
| RDA-50i | 50 Lb-in / 5.6 Nm | 1/4″ |
| RDA-100i | 100 Lb-in / 11 Nm | 1/4″ |
| RDA-250i | 250 Lb-in / 28 Nm | 1/4″ |
| RDA-750i | 750 Lb-in / 85 Nm | 3/8″ |
| RDA-50F | 50 lb-ft / 68 Nm | 3/8″ |
| RDA-100F | 100 Lb-ft / 135 Nm | 1/2″ |
| RDA-250F | 250 Lb-ft / 340 Nm | 1/2″ |
| RDA-500F | 500 Lb-ft / 677 Nm | 3/4″ |
| RDA-1000F | 1000 Lb-ft / 1355 Nm | 1″ |
| RDA-2500F | 2500 Lb-ft / 3390 Nm | 1 1/2″ |
| RDA-5000F | 5000 Lb-ft / 6780 Nm | 1 1/2″ |
Reviews
There are no reviews yet.