SK Cam Over Torque Wrenches are designed to apply a preset torque for fastening of critical components. A precision cam-over mechanism ensures the same torque is applied regardless of the operator. Over torquing is impossible even with continued turning.The SK wrenches are pre-set at the factory to your requirements. Under normal use, yearly calibration is sufficient, however; routine calibration checks on a torque analyzer would be considered prudent. Standard accuracy +/- 4%.
NOTE: Most models available as direct drive, Lock-up mode, or as torques left, ratchet right configuration. Please specify when ordering.
- Made in the USA
- Includes calibration certificate
- No extra charge to pre-set
| Model | Preset Range | Drive | Length | Height | Weight | Modes* |
|---|---|---|---|---|---|---|
| LT-M | 2-20 lb-in 0.22 – 2.2 Nm |
1/4 In | 4 1/2 In | 1 3/8 In | 6 oz | Direct – Right / Left Same |
| LT-0 | 5-60 lb-in 0.56 – 6.8 Nm |
3/8 In | 6 1/8 In | 1 5/8 In | 13 oz | Direct – Right / Left Same |
| LT-L | 5-60 lb-in 0.56 – 6.8 Nm |
3/8 In | 6 1/8 In | 1 5/8 In | 13 oz | Torque Right / Lock Left Torque Left / Lock Right |
| LT-R | 30-100 lb-in 3.4 – 11.3 Nm |
1/4 or 3/8 In | 7 In | 3 1/4 In | 4 oz | Torque Right / Ratchet Left Torque Left / Ratchet Right |
| MR-1 | 3-15 lb-ft 4 – 20.3 Nm |
3/8 or 1/2 In | 9 5/8 In | 2 3/8 In | 35 oz | Torque Right / Ratchet Left Direct – Torque Right / Torque Left Torque Left / Ratchet Right Torque Right / Lock Left Torque Left / Lock Right |
| MR-2 | 15-30 lb-ft 20.3 – 40.7 Nm |
3/8 or 1/2 In | 9 5/8 In | 2 3/8 In | 35 oz | Torque Right / Ratchet Left Direct – Torque Right / Torque Left Torque Left / Ratchet Right Torque Right / Lock Left Torque Left / Lock Right |
| MR-3 | 30-90 lb-ft 40.7 – 122 Nm |
1/2 In | 17 In | 2 1/2 In | 55 oz | Torque Right / Ratchet Left Direct – Torque Right / Torque Left Torque Left / Ratchet Right |
Reviews
There are no reviews yet.