Highly portable and user friendly, this battery-powered torque validation hub can be easily carried around the assembly line to spot check tools as part of a QA program or used at assembly stations for quick and easy torque tool validation and calibration. The new smartphone like touch-screen interface breaks down barriers and ensures quick and easy torque tool validation and calibration. EZ-TorQ digital torque tester features a built-in transducer. The easy-to-use torque analyzer is ideal for all small hand tools & non-impacting power tools.The EZ-TorQ III is not for use in testing Impact or Pulse type tools.
- Supplied with an ISO 17025 Certification of Calibration
- Three operating modes: Track, Peak, and First Peak
- Seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm)
- Vivid full color, smartphone-like touchscreen interface
- Virtually unlimited data point storage with swappable SD card memory
- Flash memory allows upgrades to be done by the user in the field & internet through the RS-232 port
- Ability to download readings to PC via RS-232 or via USB
- Features Go / No Go LEDs that illuminate when high or low tolerance setting is achieved or out of tolerance
- Accuracy ± 0.5% of reading from 20% to 100% of full scale
- Includes Spring Run Down Fixture for use when testing power tools
- Supplied in fitted carrying case
- On board software with SPC analysis
| Model | Range | Drive Size |
|---|---|---|
| EZ-TorQ III 10i |
1 – 10 lbf-in
|
17mm Female/Hex |
| EZ-TorQ III 50i |
5 – 50 lbf-in
|
17mm Female/Hex |
| EZ-TorQ III 100i |
10 – 100 lbf-in
|
17mm Female/Hex |
| EZ-TorQ III 150i |
15 – 150 lbf-in
|
17mm Female/Hex |
| EZ-TorQ III 300 |
30 – 300 lbf-in
|
17mm Female/Hex |
|
|
Each EZ-TorQ III model includes a case, universal charger, 1/4” female/hex square drive adapter and two screw run down adapters
| Accuracy | ± 0.5% of reading from 20% to 100% of full scale ± 1% of reading from 10% to 20% of full scale |
| Operating Modes | Track, Peak, and First Peak |
| Data Output | Via RS-232 or USB connection to PC |
| Filtering | Selectable: 130Hz, 150Hz, and 500Hz |
| Dimensions | (L x W x H): 7 1/4″ x 4 1/3″ x 2″ |
| Standard Accessories | Includes a case, Universal Charger, 1/4 F/Hex Sq. Dr. Adapter, USB Adapter & RS232 Cable Adapter. |
| Weight | 4.5 lbs. |
Reviews
There are no reviews yet.